|
DC Motor Speed Controls |
|
|
|
|
|
S1IC
The S1IC Series of DC Drives consist of 10 OEM & 6 Distributor models ranging from 1/100 thru 3.0 horsepower. These DC motor speed controls were first introduced in 1979 and are still one of the most reliable basic DC drives used in thousands of applications around the world. Now manufactured with SMT.
More Information |
|
|
|
|
S1MM
The S1MM Series of DC Drives consist of 3 OEM & 3 Distributor models ranging from 1/100 thru 3.0 horsepower. These DC motor speed controls were introduced in 1985 as the ultimate in reliability and performance. Because of its reliability and performance characteristics, distributors around the world have standardized on the S1MM. Now manufactured with SMT.
More Information |
|
|
|
|
S1CC-240D
The S1CC-240D chassis SCR speed control provides the same electrical features as the S1PC enclosed control. These include jumper selectable voltage adjust, current rating and feedback type, along with adjustable jog, speed/torque mode and three wire start stop.
More Information |
|
|
|
|
S1CC
The S1CC Series of chassis SCR controls consist of two models rated from 1/100 thru 3 HP. Each model consists of a S1MM chassis speed control mounted to a 7” Heatsink assembly and coupled to the Barrier Terminal Kit.
More Information |
|
|
|
|
S1CC-R
The S1CC-R Series of chassis SCR controls are similar to the S1CC Series, but with the addition of an Anti-Plug Reversing Module. They provide variable speed motor control, along with relay reversing; electronic dynamic braking and an anti-plugging circuit which helps prevent motor demagnetization. Properly applied, these controls can be cycled up to 30 times per minute.
More Information |
|
|
|
|
S1MD
The S1MD, also known as our “Multi-Drive,” can be used with motors from 1/100 thru 2 horsepower and is housed in a NEMA-1 Aluminum enclosure. The heart of this DC Drive is the S1MM. A unique feature of the S1MD allows it to operate a 90 VDC motor from either 115 or 230 VAC making it universally acceptable.
More Information |
|
|
|
|
S1WM
The S1WM Series of NEMA-1 aluminum enclosed DC Drives is available in 2 models from 1/100 thru ¾ horsepower. The driving force behind these models is our most reliable SCR control, the S1MM. Its horsepower range is only limited by its physical size; however, it still provides all of the flexibility of our S1MD, Multi-Drive.
More Information |
|
|
|
|
S1MG
The S1MG Series of four-quadrant regenerative DC Drives consists of 2 models range from 1/50 thru 2.0 horsepower. These, ultra-compact, chassis/IP-20 style drives are ideal for OEMs. For applications requiring repetitive reversing with regenerative braking the S1MG Drives offer excellent repeatability and reliability.
More Information |
|
|
|
|
S1PB
The S1PB Series of SCR DC Drives range from 1/100 thru 3.0 horsepower. These, compact, chassis style drives are ideal for applications requiring occasional reversing with solid-state dynamic braking. The S1PB Drives have been in service since 1985. They offer excellent repeatability and reliability.
More Information |
|
|
|
|
S1RG
The S1RG Series of four-quadrant regenerative DC Drives range from 1/10 thru 5.0 horsepower. These chassis style drives are ideal for OEM applications requiring repetitive reversing with regenerative braking. The S1RG Drives offer excellent repeatability and reliability.
More Information |
|
|
|
|
S1PC
The S1PC Series of SCR DC Drives consist of 2 models ranging from 1/50 thru 3.0 horsepower, housed in heavy duty NEMA-4X (IP-65) die cast aluminum, washdown / watertight enclosures for indoor or outdoor use. These analog style DC Drives do not require programming. Jumper selectable functions and simple trimpot adjustments make the S1PC Series quick and easy to use.
More Information |
|
|
|
S1RC
The S1RC Series of four-quadrant regenerative DC Drives consists of 2 models ranging from 1/10 thru 2.0 horsepower, housed in heavy duty NEMA-4X (IP-65) die cast aluminum washdown / watertight enclosures for indoor or outdoor use. Ideal for OEM applications requiring repetitive reversing with regenerative braking. The S1RC Drives offer excellent repeatability and reliability.
More Information |
|
|
|
|
S1PW
The S1PW Series of PWM DC Drives consist of 2 models ranging from 1/50 thru 1.5 horsepower, housed in heavy duty NEMA-4X (IP-65) die cast aluminum, washdown / watertight enclosure for indoor or outdoor use. These analog style PWM DC Drives do not require programming. Jumper selectable functions and simple trimpot adjustments make the S1PW Series quick and easy to use.
More Information |
|
|
|
|
S1PI
The S1PI Series of SCR DC Drives consist of 2 models ranging from 1/6 thru 2.0 horsepower, housed in heavy duty NEMA-4X (IP-65) die cast aluminum washdown / watertight enclosures for indoor or outdoor use. These analog style DC Drives are ideal for indexing applications. S1PI Drives have been in service since 1990. They offer excellent repeatability and reliability All adjustments are factory set and do not require programming. Jumper selectable functions and simple trimpot adjustments make the S1PI Series quick and easy to use.
More Information |
